Great Plains TC5321

GreatPlains TC5321

Turbo-Chisel® Folding

 

Hybrid Chisel

If your goal is to size and incorporate residue in the top 8-12" of soil while leaving the soil level enough for a single-pass tool in the spring, the Great Plains Turbo-Chisel® is the tool of choice!
Great Plains’ exclusive 22" Turbo Coulters on 7½" spacing start the process by slicing residue. The 22" blades run on a 1¾" gang bolt with cast spools, putting the weight “in the gang” for outstanding performance and reliability. The gang bearings are field-proven maintenance-free 211 bearings with cast housings mounted to our heavy-duty 1" x 3" C-shank standards. The coulter bar is hydraulically adjustable for on-the-go depth control.
Models available are 9-15 shank rigid or 7-23 shank folding with a recommended horsepower requirement of 30 hp per shank. Units can be equipped with either standard chisel shanks throughout, or toggle trip parabolic shanks. The heavy-duty toggle trip shanks trip at 2,450 pounds, ensuring consistent depth up to 12" deep with uniform horizontal fracture. Rear attachment options include the choice of a “buster bar” to level and smooth the ground or our Great Plains chopper wheels to crumble clods while firming the soil.
There are other coulter chisels available on the market… but there is only one Turbo-Chisel!

TURBO COULTERS
The turbo design allows the blade flute to attack the residue vertically, providing improved cutting and penetration with decreased hairpinning.
TOGGLE-TRIP RESET SHANK
The Heavy-Duty Toggle Trip Shank has a 2,450-pound horizontal trip force and will automatically reset when tripped.
AVAILABLE SHANK COMBINATIONS
Order the Turbo-Chisel the way you want it with two different shank combinations: Standard Chisel (pictured: two shanks on the left) or Heavy-Duty Parabolic (pictured: shank on the far right).
Exclusive Maintenance-Free Bearings
Great Plains uses the exclusive PEER® TILLXTREME® Maintenance-Free Pillow-Block Bearings in its gangs, as well as smaller TILLXTREME Maintenance-Free Bearings in its rolling attachments.
Model TC5321
SHANK SPACING 15"
COULTER SPACING 7.5"
TRANSPORT TIRES 12.5Lx15
F-ply (4)
WEIGHT (approx lbs) 15,650
PTO H.P. REQ (min) Option 26: 30hp per shank
DIMENSIONS
TILLAGE WIDTH 26' 3"
TRANSPORT WIDTH 14' 9"
TRANSPORT HEIGHT 13' 6"
TILLAGE INFO
CENTER SECTION 10'
1ST WING SECTION 8' 9"

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.