Great Plains NTS2511

GreatPlains NTS2511

No-Till Seeder

 

Reclaim Your Ground
The new NTS25 No-Till Seeder, available in 7-, 9-, and 11-foot widths, makes quick work of your seeding tasks in renovating pastures, reclaiming rights-of-way, and planting food plots.
Our NTS25 Series Seeder comes with a variety of features built in and ease of use in mind. The unit is ground-driven by spikes incorporated into the rear packer-roller; however, the operator can easily disengage any of the seed boxes with simple lockout pins on each drive sprocket or lock out all boxes with one pin on the main sprocket.
This American-made seeder comes standard with main and small seeds boxes, with an optional factory-installed native grass (or fluffy) seed box available. The NTS is available as a 3-point model or pull-type model with transport wheels.
The main and small seeds boxes are calibrated by opening the seed cups with the seed-rate regulator. The optional native grass box is calibrated with a 4-speed, single-lever gearbox. Aggressiveness of the NTS is controlled by manually angling the front spiked rollers. Seed is dropped and broadcast to the soil below, protected by a metal wind shield, and gently pressed into the soil with the rear cast packer. Optional acre meter keeps track of acres planted.

Native Grass Agitators
Optional native grass box uses agitators to keep the seed flowing toward the picker wheel.
Native Grass
The optional native grass seed box is equipped with a walk board to make filling the main box easier.
Mud Scrapers
Placed on the rear packer roller to keep soil from compacting on roller in damp conditions.
Lockout Clutch
Easily disengage drive sprockets with Great Plains' patent-pending lockout clutch on all boxes.
Front Rollers
Feature 1/2" x 2" spikes that break through thatch and crust to prep the soil for seeding.
MODEL INFO No-Till Seeder
MODEL NTS2511
HORSEPOWER 40-120
HITCH 3-Point, Cat. I or II or Pull-Type with transport wheels
WORKING WIDTH 11'
LENGTH 4' 9" (3pt.), 11' 1" (pull-type)
HEIGHT 42"
WEIGHT 3-PT (PULL-TYPE) LBS. 2,674 (3,882)
MAIN BOX CAPACITY 11.3 bu.
SMALL SEEDS BOX 2.6 bu.
NATIVE GRASS BOX 12.7 bu.
OUTPUT Varies by seed, drop spread
FRONT ROLLERS 8-5/8" diameter, 1" spindles with greaseable ball bearings
FRONT ROLLER ANGLE Up to 18 degrees
FRONT ROLLER SPIKES 1/2" x 2", Heat-treated steel, replaceable
REAR PACKER ROLLER 11-3/8" diameter, cast and notched gray iron rings
SEED CUPS-MAIN BOX and SMALL SEEDS BOX (EACH BOX) 18

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.