Case IH 465

Case IH 465 for sale at Colusa, Dos Palos, Merced, Stockton, Stratford, Turlock, Willows, and Yuba City, California

Double tap to zoom

Case IH 465 for sale at Colusa, Dos Palos, Merced, Stockton, Stratford, Turlock, Willows, and Yuba City, California

 

Features

Tackle Primary and Secondary Tillage With One Tool

Case IH Speed-Tiller 465/475 are high-speed tillage tools that dig like a disk and finish like a finisher — maximizing the agronomic quality of the seedbed from surface to floor, fall or spring. Featuring indexed, independently mounted blades, these high-speed disks are available in either rigid mounted or trailing configurations to meet the unique demands of each operation.

Boost Seedbed Quality From Floor to Surface

Agronomic performance sets the Speed-Tiller 465/475 high-speed disks apart from the rest. All Case IH tillage tool designs are tested and proven to maintain or improve the agronomic performance of your fields. While competitive units till fields to look smooth on the surface, the Case IH Speed-Tiller is the only high-speed disk on the market that creates a smoother, more level seedbed floor and a finish that fits your fields.

  • Smooth seedbed floor contributes to consistent, accurate seed placement and uninhibited root development
  • Unmatched agronomic performance maximizes weed control and water penetration for healthier soil

 

LEVELING & DEPTH CONTROL

A True Dual-Season Tool

The Speed-Tiller digs like a disk and finishes like a finisher for flexibility no matter the season. In fall, run deeper — from 3 to 6 inches — to manage crop residue, control weeds and destroy root balls. In spring, run at shallower depths to create an ideal seedbed finish.

Depth Control

  • Exclusive constant-level hitch delivers deep penetration, consistent disk depth and residue management
  • Puts usable weight on the blades to run deeper or transitions to roller wheel to optimize tool finish
  • Wing down pressure provides consistent penetration and disk depth across the entire width to assure a high-efficiency seedbed

 

Leveling

Three conditioner attachment options provide the finish that fits each field:

  • 16.5- and 19-inch diameter with 1.2-inch rifled round bar Crumbler roller
  • 22-inch-diameter heavy-duty steel spring conditioner
  • 21-inch-diameter rubber roller with mud scrapers

 

INDEPENDENT BLADES

Designed to Work Your Entire Soil Profile

  • Laterally adjustable, indexed, independently mounted blades eliminate compacted valleys and humps where blades run below the soil surface
  • Ability to move more soil than traditional high-speed compact disks
  • Unique blade position and design reduces plugging in wet soil conditions with high volumes of trash
  • Rubber-torsioned disk arms, paired with the powerful leveling roller, effectively incorporate stubble into the soil

 

OPERATING SPEED

Productivity at Your Speed

The Speed-Tiller high-speed disk is designed for superior agronomic performance at your speed, in your conditions. Reach high speeds with more robust disk mounts, arms and bearings, and a rugged frame built to withstand some of the world’s harshest soil conditions.

  • 1.25-inch-(32 mm) thick disk arms are the heaviest and strongest on the market, and nearly double the thickness of competitive units
  • 5-bolt heavy duty disk bearings and hubs use unitized double taper roller bearings and a 7-lip cartridge seal for superior ruggedness and reliability
  • Heavy-duty disk arm mount rubber torsions provide the needed down pressure to penetrate the hardest conditions with the needed protection in rocky soil conditions
  • Hydraulically positioned conditioner roller allows the operator to lift the conditioner roller in muddy conditions

Specifications

SPECIFICATIONS SPEED-TILLER 465 RIGID MOUNTED MODEL
Operating Width 5.7 ft. (1.75 m) 6.5 ft. (2 m) 7.4 ft. (2.25 m) 8.2 ft. (2.5 m) 9.8 ft. (3.0 m) 11.5 ft. (3.5 m) 13.1 ft. (4.0 m) 14.8 ft. (4.5 m) 18 ft. (5.5 m)
TRACTOR REQUIREMENTS  
Engine HP Range  70 – 90 HP
(50 – 75 kW)
3,263 lb. (1 480 kg) 3,629 lb. (1 646 kg) 3,947 lb. (1 790 kg) 4,516 lb. (2 048 kg) 5,195 lb. (2 356 kg) 6,205 lb. (2 814 kg) 7,654 lb. (3 472 kg) 9,233 lb. (4 188 kg)
Remote Hydraulic Valves N/A
Hydraulic Pressure N/A
OVERALL MACHINE  
Transport Width 6.9 ft. (2.05 m) 7.8 ft. (2.35 m) 8.1 ft. (2.5 m) 9.6 ft. (2.9 m) 11.2 ft. (3.4 m) 12.7 ft. (3.9 m) 14.2 ft. (4.4 m) 15.9 ft. (4.9 m) 19.4 ft. (5.9 m)
Transport Height N/A
Weight  3,378 lb.  (1 532 kg) 3,263 lb. (1 480 kg) 3,629 lb. (1 646 kg) 3,947 lb. (1 790 kg) 4,516 lb. (2 048 kg) 5,195 lb. (2 356 kg) 6,205 lb. (2 814 kg) 7,654 lb. (3 472 kg) 9,233 lb. (4 188 kg)
Depth Control N/A
Wing Down Pressure N/A
GANGS AND BLADES  
Blade Mounts Individually mounted, heavy duty 1 1/4 in. (32 mm) thick arm with 2 in. (51 mm) high density rubber torsion system; lateral front gang adjustment
Blade Bearings Heavy duty double taper rolling bearing
Blade Spacing 10 in. (250 mm) spacing on each gang; 5 in. (125 mm) effective cut spacing
Blade Diameter (Standard / Optional) 22 in. (559 mm) shallow concavity blades / 24 in. (610 mm) std. concavity blades
Blade Thickness 6 mm (0.236 in.)
Blade Design Serrated front and rear blades
Number of Blades  14 16 18 20 24 28 32 36 44
WHEELS AND TIRES  
Main Frame (Standard / Optional) N/A
Wing Frame (Standard / Optional) N/A
REAR ATTACHMENTS  
Mounting (Standard / Optional) Mechanically positioned with heavy duty rubber torsion system and heavy duty bearings / Hydraulically positioned with heavy duty rubber torsion system with heavy duty bearings
Crumbler 16.5 in. (420 mm) diameter with 1 3⁄16 in. (30.2 mm) rifled round bar crumbler
Rubber Roller N/A
Spring 22 in. (550 mm) diameter heavy duty steel spring roller