Land Pride FM3188

FM3188

FM31 Series Flail Mowers

 

FEATURES BENEFITS
88" Cutting width A good cutting width for many applications.
35-80 HP Gearbox Rating Fits a large array of consumer, municipality and landscape of tractors.
3-Point screw type hitch can be offset 7 3/4" Left & right Easily offset the hitch for a closer cut alongside buildings, fences, roadsides and for getting under tree limbs.
ACME threads on offset ACME threads are deeper allowing for easy screwing adjustment.
One year gearbox warranty The gearbox is designed tough to withstand the rigors of flail mowing.
540 RPM cast iron gearbox with over-running clutch Enables the rotor to free swing to a stop when the tractor PTO has been turned off.
1/2" - 6" Cutting height Variable cutting heights for many uses. Lowest cutting height allows for scalping in grasses such as Bermuda prior to over-seeding.
1" Cutting capacity Cut saplings when used in a rough setting.
Fine cutting knives Heavy enough to cut 1" material, yet fine enough to groom a yard.
5 1/2" Rotor diameter Large rotor is able to take rough conditions.
Reverse rotor rotation Brings the cut material up and over which allows it to be dispersed more evenly.
High knife tip speed Knife tip speed of 9,805 fpm for cleaner cut.
Cat. 4 driveline Heavy-duty drive-line matches up with HP range as well as potential conditions.
4 - 'B' Section belts 'B' Section belts have more surface to pulley contact and fits deeper in the groove.
3/16" Deck thickness Allows the mower to handle rough conditions.
Baffles on top inside of deck Keeps cut material from clumping together, ensuring an even distribution of clippings.
Height adjusting roller Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns.
Standard scrapers on rear height adjusting roller Keeps roller clean for consistent cutting height.
Hinged rear gate Can be opened for easier discharge in heavy conditions, or left closed for greater mulching capabilities.
  • 35-80 HP
  • 88" Width
  • 1" Cutting capacity
  • 1/2" - 6" Cutting height
  • Scraper on rear height adjusting roller
  • Fine cut knives
  • 5 1/2" Rotor diameter
  • Reverse rotor rotation
  • Hitch offsets by nearly 8"
  • Cat. 4 driveline

 

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.